New KAO MING KMC-2000SD | Gantry Machining Centers (incld. Bridge & Double Column)
Have one to sell?
ConditionNew
New
Features：
- The X, Y and Z axis are fully support by rigid box ways.
- Two gear ranges, helical and spur gears support the spindle transmission system for machining large cavities at low RPM.
- All surfaces that make contact with the slideways are lined with Turcite-B to ensure long lasting and optimum rigidity during heavy cutting conditions.
- Flush spindle. The Distance is 200~900 mm from spindle nose to table top.
Features：
- The X, Y and Z axis are fully support by rigid box ways.
- Two gear ranges, helical and spur gears support the spindle transmission system for machining large cavities at low RPM.
- All surfaces that make contact with the slideways are lined with Turcite-B to ensure long lasting and optimum rigidity during heavy cutting conditions.
- Flush spindle. The Distance is 200~900 mm from spindle nose to table top.
Imperial
| X | 87.795" |
| Y | 78.74" |
| Z | 27.559" |
| Power | 25 hp |
| RPM | 3,200 RPM |
| Taper | ISO50 |
| Table-W | 64.961" |
| Table-L | 78.74" |
We use cookies to improve your experience. Privacy Policy.